SERVICES

“EC “TEREDO” LLC provide next services

PRODUCTION SERVICES

Assembly of equipment

Assembly of electrotechnical / hydraulic / gas / pneumatic equipment For information

You cannot finish production in time? Broken deadlines? Our specialists will assist in the assembly of electrical cabinets, panels and gas | pneumatic | hydraulic stands.

Details…

MODERNIZATION

Modernization of automatic machines, lines

Modernization of automatic machines and lines on the basis of Omron, Mitsubishi, Siemens controllers (PLCs) in any sphere of production activity For information

We carry out modernization of automatic machines in any branch of industry: food, pharmaceutical, energy, agricultural and others. Examples of automatic machines that are being upgraded: packaging lines, cutting machines, dosing machines, ovens, mixers, bottling lines, PET packaging machines, grain dryers and many others.

Modernization is performed on the basis of Omron, Mitsubishi, Siemens control equipment.

Details…

Modernization of PAS (ACS)

Modernization of PAS (ACS) equipment at production enterprises in any sphere of production activity For information

We carry out modernization of the PAS (ACS) equipment of all hierarchical levels of the system structure: sensors, sensor stands, electrical cabinets, controllers cabinets, software-hardware complexes (SHC), automated workstations (AWS), servers, etc.

Modernization is performed on the basis of Omron, Mitsubishi, Siemens control equipment.

Details…

PROGRAMMING AND SOFTWARE ADJUSTMENT

Software Verification

Verification of software of PLC, HMI, SCADA, scripts, micro-programs, etc. For information

We perform an independent software verification for industrial applications.

Details…

Programming of Mitsubishi controllers

Programming, adjustment, diagnostic of Mitsubishi PLCs For information

We can help you to develop an application software for Mitsubishi controllers F, iQ-F, L, Q, iQ-R series. Also we perform adjustment and diagnostic of PLCs. We implement algorithms of any complexity. The software is always necessarily tested. We do on request:

  • Software verification
  • Program documentation
  • Description of algorithms
Details…

Programming of Omron controllers

Programming, adjustment, diagnostic of Omron PLCs For information

We can help you to develop an application software for Omron controllers of all series. Also we perform adjustment and diagnostic of PLCs. We implement algorithms of any complexity. The software is always necessarily tested. We do on request:

  • Software verification
  • Program documentation
  • Description of algorithms
Details…

Programming of Siemens controllers

Programming, adjustment, diagnostic of Siemens PLCs For information

We can help you to develop an application software for Siemens controllers of all series. Also we perform adjustment and diagnostic of PLCs. We implement algorithms of any complexity. The software is always necessarily tested. We do on request:

  • Software verification
  • Program documentation
  • Description of algorithms
Details…

Programming of operator panels (HMI)

Programming of operator panels (HMI) Weintek, Mitsubishi, Omron, Siemens and other manufacturers For information

We can help you to develop an application software for operator panels (HMI) Weintek, Mitsubishi, Omron, Siemens and other manufacturers. The software is always necessarily tested. We do on request:

  • Software verification
  • Description of algorithms
  • User (Operator) Guide
Details…

Programming of SCADA: CitectSCADA

Programming of CitectSCADA: mnemonic schemes, trends, signaling, reports, manual data entry, scripts, diagnostics and much more functions For information

We can help you to develop a (SCADA) CitectSCADA dispatching program. The software is always necessarily tested. We do on request:

  • Software verification
  • Description of algorithms
  • User (Operator) Guide
Details…

Programming of SCADA: IgnitionSCADA

Programming of IgnitionSCADA: mnemonic schemes, trends, signaling, reports, manual data entry, scripts, diagnostics and much more functions For information

We can help you to develop a (SCADA) IgnitionSCADA dispatching program. This SCADA is distinguished by its ability to run on Windows, Linux and Mac. The software is always necessarily tested. We do on request:

  • Software verification
  • Description of algorithms
  • User (Operator) Guide
Details…

Programming of SCADA: OpenSCADA

Programming of OpenSCADA: mnemonic schemes, trends, signaling, reports, manual data entry, scripts, diagnostics and much more functions For information

We can help you to develop a (SCADA) OpenSCADA dispatching program. The software is always necessarily tested. We do on request:

  • Software verification
  • Description of algorithms
  • User (Operator) Guide
Details…

Programming of SCADA: Wonderware Intouch

Programming of Intouch: mnemonic schemes, trends, signaling, reports, manual data entry, scripts, diagnostics and much more functions For information

We can help you to develop a (SCADA) Intouch dispatching program. The software is always necessarily tested. We do on request:

  • Software verification
  • Description of algorithms
  • User (Operator) Guide
Details…

Programming / Configuration of Industrial Smart Devices

Programming / Configuration of Industrial Smart Devices: microcontrollers, microcomputers, communication gateways, and more For information

We program, configure Smart Devices for industrial applications: industrial microcomputers (for example, MOXA UC7110, UC7122) | intellectual relays | normalising converters and more. Operating systems with which we have experience: Windows, Linux and their derivatives. We program on C++, Java and their derivational programming languages.

Details…

Software configuration for industrial computers

Software configuration for industrial computers For information

We configure the software for desktop, wall, panel computers under Windows, Linux. We perform installation and setup:

  • Operating system: both personal and server type
  • Drivers, libraries, software for interfaces with computers, servers, controllers, etc
  • NTP servers and clients
  • Differentiate user rights: security policy
  • Application software
  • Service Software
  • Antivirus software and firewalls
  • etc.
Details…

DIAGNOSTICS

Diagnostics of Mitsubishi controllers (PLCs)

Diagnosis of controllers (PLCs) and automatic machines / automatic lines based on Mitsubishi controllers (PLCs) For information

Doesn’t work the automatic machine / automatic line and it controlled by a Mitsubishi controller (PLC)? Our specialists will come to your enterprise and perform:

  • connection to the controller for reading diagnostic information
  • test checks to locate the fault location
  • check of electrical connections, wiring diagrams (if necessary)
  • testing of electrical equipment: motors, frequency converters, contactors, soft starters, regulators, overload and surge protection devices, sensors, etc. (if necessary)
  • release of fault detection report

We work all over Ukraine and abroad

Details…

Diagnostics of Omron controllers (PLCs)

Diagnosis of controllers (PLCs) and automatic machines / automatic lines based on Omron controllers (PLCs) For information

Doesn’t work the automatic machine / automatic line and it controlled by a Omron controller (PLC)? Our specialists will come to your enterprise and perform:

  • connection to the controller for reading diagnostic information
  • test checks to locate the fault location
  • check of electrical connections, wiring diagrams (if necessary)
  • testing of electrical equipment: motors, frequency converters, contactors, soft starters, regulators, overload and surge protection devices, sensors, etc. (if necessary)
  • release of fault detection report

We work all over Ukraine and abroad

Details…

Diagnostics of Siemens controllers (PLCs)

Diagnosis of controllers (PLCs) and automatic machines / automatic lines based on Siemens controllers (PLCs) For information

Doesn’t work the automatic machine / automatic line and it controlled by a Siemens controller (PLC)? Our specialists will come to your enterprise and perform:

  • connection to the controller for reading diagnostic information
  • test checks to locate the fault location
  • check of electrical connections, wiring diagrams (if necessary)
  • testing of electrical equipment: motors, frequency converters, contactors, soft starters, regulators, overload and surge protection devices, sensors, etc. (if necessary)
  • release of fault detection report

We work all over Ukraine and abroad

Details…

PLANNING AND OPTIMISATION

Analysis and optimisation of Process Automation Systems (PAS) and Manufacturing Execution Systems (MES) of industrial enterprises

Analysis and optimisation of Process Automation Systems (PAS) and Manufacturing Execution Systems (MES) of industrial enterprises: minimizing costs, improving efficiency, profitability For information

You leader-reformer and going to bring order to the production? We offer assistance in reducing energy, financial and human resources for the repair, maintenance and exploitation of technical equipment of PAS and MES through structural and functional optimisation. The proposal is appropriate for enterprises planning a deep modernisation / modification of their production capacities.

Details…

MES Development Planning

Planning of MES development for the guaranteed realisation of your expectations from modernisation For information

Are you the leader of a developing manufacturing company? Is there a desire to increase production volumes, reduce downtime of equipment, optimise costs for repair, maintenance and operation? MES should be developed along with manufacture technology. We offer assistance in planning of modernisation and modification of your manufacture.

Details…

CONSTRUCTION AND DEVELOPMENT

Synthesis of conceptual solutions

Synthesis of conceptual solutions for automation tasks solving: circuit and system engineering For information

Do not know how to properly build an automation system, perform measurements, choose technical solution? You cannot know everything. We also do not know everything. Then let’s find a solution together! “Two heads are better than one!”. We have an experience that we are ready to share with you.

Details…

Adjustment of automation systems

The whole range of services for adjustment of automation systems and their components For information

We carry out adjustment of equipment of automation systems for industrial (plants, factories, etc.) and non-industrial (business centers, hotels, shopping and entertainment centers, etc.) objects.

Details…

DOCUMENTATION DEVELOPMENT

Technical Specification (TS), Technical Requirements (TR)

Development of a Technical Specification (Technical Requirements) and its approval support (for imported to Ukraine products) For information

We will help you to design and agree the Technical Specification (Technical Requirements) for the Process Automation Systems (PAS). As a rule, it is carried out for imported products. We have experience of agreement of documents with state supervising authorities.

Details…

Test Procedures (TP)

Development of Test Procedures for the PAS and its approval support For information

We will help to design and agree the Test Procedures for the Process Automation Systems (PAS) at different stages of its manufacturing. We have experience of agreement of documents with state supervising authorities.

Details…

Estimation of system reliability

Calculation of reliability of PAS For information

We perform calculation of reliability parameters of Process Automation Systems (PAS) in accordance with the requirements of Ukrainian normative documents. Reliability describes the ability of a system or component to function under stated conditions for a specified period of time. Calculation method is structural analysis. The calculation is performed according to the known values of the components reliability in accordance with State Standard of Ukraine (DSTU) 2862. The structural schemes of function reliability (structural-functional schemes) of the PAS are compiles and analyzes. Taking into account the types of connections between elements, the calculation of reliability parameters is performed.

Details…

Design documentation (drawings)

Designing and development of design documentation for equipment For information

We develop design documentation for electrical cabinets | panels and gas | pneumatic | hydraulic stands.

Details…

Operational and program (software) documentation

Development of operational and software documentation for the PAS and its components For information

We develop operational documentation for electrical cabinets | panels and gas | pneumatic | hydraulic stands. Develop program (software) documentation for Process Automation Systems (PAS) and their components.

Details…

EQUIPMENT SELECTION AND ADJUSTMENT

Electrical equipment selection and adjustment

Selection and adjustment of electrical equipment of PAS For information

We can help you to select Electrotechnical equipment for your needs (with departure to the object if necessary):

  • Controllers
  • Regulators
  • Indicators
  • Touchscreen operator panels (HMI)
  • Computers
  • Servers
  • Power supplies
  • Automatic transfer switch (ATS)
  • Electromagnetic, current relays
  • Intellectual relays
  • Normalized converters
  • Network and digital devices
  • etc.
Details…

Selection and adjustment of pneumatic / gas and hydraulic equipment

Selection and adjustment of pneumatic, gas and hydraulic components of PAS For information

We can help you to select the elements of pneumatic / gas and hydraulic lines for your needs (with departure to the object if necessary):

  • Valves
  • Warning Valves
  • Safety valves
  • Filters for mechanical impurities, moisture, oil vapor
  • Pressure regulators
  • Pressure drop regulators
  • Heat exchangers
  • Pressure and temperature indicators
  • Flowmeters, Rotameters
  • etc.
Details…

Selection and adjustment of control units

Selection and adjustment of control components of PAS For information

We can help you to select the control elements (actuators) for your needs (with the departure of the object if necessary):

  • Electromagnetic Valves
  • Servo valves
  • Pilot valves
  • Multi channel switches
  • Flow pumps
  • etc.
Details…

Selection and adjustment of process (control) instrumentation

Selection and adjustment of process (control) instrumentation for industrial purposes For information

We can help you to select the process (control) instrumentation for your needs (with departure to the object if necessary):

  • Analytical devices
  • Pressure sensors
  • Temperature sensors
  • Encoders (position sensors)
  • Thermostats
  • Displacement sensors
  • etc.
Details…